Registration Of System Software (Sst To Usb Memory) - Canon imagerunner C5180 Service Manual

7) Press [OK] after the system software registration completion message is displayed.

20.2.2 Registration of System Software (SST to USB memory)

Register the system software registered in the SST onto USB memory.
[Preparation]
Required Items
- PC installed with SST Ver3.22 or later
- USB memory (*)
*: Required specification for USB memory
Interface
Memory
Format
USB memory protected by security cannot be used. Deactivate the security before use.
[System Software Registration Procedure]
1) Boot the PC
2) Connect the USB memory to the USB port of the PC.
3) Boot the SST.
USB 1.1 or later (Recommendation: USB 2.0)
Memory 1GB or more recommended
(Total size of the system software package exceeds 512MB)
FAT (FAT16), FAT32 (NTFS, HFS not available)
1 partition only (multiple-partition not available)
F-20-7
Chapter 20
20-7