Counter (Counter Mode) - Canon imagerunner C5180 Service Manual

Chapter 19

19.7 COUNTER (Counter Mode)

19.7.1 COPIER
19.7.1.1 COPIER Table
The COPIER/COUNTER screen is shown below. The items are described starting on the next page.
Clearing counter values
1) Select the item to clear, displaying it in reverse.
2) Press the clear key on the operation panel.
- The counter is cleared, resetting it to "00000000".
Small size and large size in this mode
- TOTAL/PICKUP/FEEDER/JAM
Large (L) size: Paper larger than A4, LTR size
Small (S) size: A4, LTR size and smaller paper
- DRBL-1/DRBL-2 (PD-PU-RL, C3-PU-RL, C4-PU-RL)
Large (L) size: Paper longer than 324 mm in the feed direction
Small (S) size: Paper 324 mm or shorter in the feed direction
- DRBL-2 (DF-PU-RL, DF-SP-PD, DF-F-BLT, DF-SP-RL)
Large (L) size: Paper longer than the LTR length (216 mm) in the feed direction
Small (S) size: Paper of the LTR length (216 mm) or shorter in the feed direction
Reading counters for consumable parts/parts needing periodic replacement
The copier has special counters (DRBL-1/DRBL-2) that can be used to provide a guideline for when to replace
consumable parts or parts needing periodic replacement.
Small size sheets are counted in increments of 1, large size sheets are counted in increments of 2.
<Example>
TR-BELT
[1]
[1]: Displays the part name. In this example, the intermediate transfer belt unit.
[2]: Displays the counter value (actual number of sheets used). The value is cleared by pressing the clear key
when the part is replaced.
19-128
00000201
/ /
[2]
F-19-12
00240000 0%
/
[3]
!! 000082
[4] [5] [6]