Chapter 10
10.10.46.3 Removing the Delivery Vertical
Path Cover
1) Using a flat-blade screwdriver, remove the slip-
stop [2] from the delivery vertical path cover [1];
then, remove the strap [3] from the delivery inside
cover.
F-10-250
2) Attach the strap [1] found on the delivery inside
cover to the new delivery vertical path cover [2];
then, fix it in place using the slip-stop [3].
F-10-251
10-94
10.10.46.4 Points to note when mouting
the delivery vertical path unit
1) Attach the top [1] of the delivery vertical path
inside of the machine plate [2].
When attaching the delivery vertical path unit, be
sure to lift it once before setting it in place.
Engage the left and right hooks [3] on the machine
plate [4] so as to attach the new delivery vertical
path unit.
F-10-252