Canon imagerunner C5180 Service Manual page 756

4. ACC
*1 Not displayed in service mode.
Sub item
COIN Coin vendor switch
Sets whether to enter coin vendor management mode.
Setting values
0: Coin vendor not in use (control card can be used, no tariff applied)
1: Coin vendor (tariff applied)
2: Remote counter (tariff applied)
3: DA tariff
[Factory settings and after RAM clear: 0]
Caution!
When the setting values are set to '3' (DA tariff), the following items will be changed also.
[Service mode]
- COPIER>OPTION>USER>CONTROL: 1
- COPIER>OPTION>USER>AFN-PSWD: 1
- COPIER>OPTION>BODY>UI-BOX: 0
- COPIER>OPTION>BODY>UI-SEND: 0
- COPIER>OPTION>BODY>UI-FAX: 0
- COPIER>OPTION>BODY>UI-EXT: 0
- COPIER>OPTION>BODY>DA-CNCT: 1
[User mode > system management settings]
- Extension settings > Extension function priority: ON
- Network settings > Email/IFAX > SMTP Rx: OFF
- Network settings > Email/IFAX > POP3 Rx: OFF
- Network settings > SMB settings > use SMB printing: O
- Network settings > TCP/IP settings > use IPP printing: O
- Network settings > TCP/IP settings > IP address range settings > print permitted address ON/
OFF: ON
- Network settings > TCP/IP settings > use FTP printing: OFF
DK-P Used to set paper size used by paper deck (option).
Setting values
0: A4 [Factory default/After RAM clear]
1: B5
2: LTR
CARD-SW Used to select UI screen when coin vendor is supported.
Setting values
0: Coin [Factory default/After RAM clear]
1: Card
2: Coin + card
USB-MSK Limiting the number of USB-HOST channels on the models with the USB-HOST installed.
Setting values 0 to 2
The relevant channels of the USB-HOST are masked (deactivated).
(e.g.)
When there are two channels of CH0 and CH1,
0: Not mask any channel.
1: Masks CH1.
2: Reserved
STPL-LMT Used to restrict number of sheets for saddle binding.
*1 0: 5 sheets (no white band)
1: 10 sheets (no white band)
2: 10 sheets (white band)
3: 15 sheets (no white band) [Factory default/After RAM clear]
SC-TYPE Used to switch type of coin vendor-compatible model
Whenever possible, avoid using this setting during normal operation.
T-19-62
COPIER>OPTION>ACC
Description
Chapter 19
level.
1
1
1
1
2
2
19-111