10.10.35.2 Removing the Drawer
Connector (fixing feeder unit)
1) Remove the connector base [5].
- harness [2] from the cable clamp [1]
- 2 connectors [3]
- 2 screws [4]
F-10-174
2) Remove the drawer connector [2].
- 2 screws [1]
F-10-175
10.10.36 Duplex Roller 1
10.10.36.1 Preparation for Removing the
Duplex Roller 1
1) Remove the fixing unit.
1-1) Remove the fixing drive unit.(page 11-
38)Reference[Removing the Fixing Drive
Unit]
1-2) Remove the fixing unit.
2) Remove the fixing/feeder unit.(page 10-
63)Reference[Removing the Fixing/Feeder Unit]
10.10.36.2 Removing the Duplex Roller 1
1) Open the cover of the fixing feeder unit [1].
[1]
F-10-176
2) Remove the duct [2].
- 2 screws [1]
[2]
F-10-177
Chapter 10
[1]
10-73