5) Slid the IH power supply unit [1] slightly in the
direction of the arrow, and remove the clamp [2]
and disconnect the 2 connectors [3].
6) Remove the IH power unit [1].
[1]
F-2-62
7) Remove the 4 screws [1], and slide the DC power
supply unit [2] slightly toward the front.
[2]
[1]
F-2-63
8) Remove the 3 screws [1], and pull out the power
supply cord mount slightly to the front.
[2]
[3]
[3]
[1]
[2]
[1]
F-2-64
9) Disconnect the 2 connectors [1], and detach the
power cord mount [2].
[2]
F-2-65
10) Remove the screw [1], and open the 2 clamps [2].
[2]
F-2-66
Chapter 2
[1]
[1]
[1]
2-23