Canon imagerunner C5180 Service Manual page 373

Chapter 10
6) Remove the pick-up system sensor mounting
plate.
6-1) Remove the bracket [2].
- 2 screws [1] at the rear
[1]
F-10-77
6-2) Remove the sensor mounting plate [5].
- connector [1]
- screw [2]
- cassette pickup solenoid [3]
- 5 screws [4]
Points to Note When Mounting the Sensor
Mounting Plate
Any of the gears can drop off. When attaching the
sensor mounting plate, be sure that the pickup unit
will not face downward.
F-10-78
10-46
[1]
[2]
10.10.11.2 Removing the Cassette Paper
Sensor
1) Remove the cassette paper sensor [2].
- connector [1]
F-10-79
10.10.11.3 Points to Note When Mounting
the Pickup System Sensor Mounting
Plate
Points to Note When Mounting the Sensor
Mounting Plate
Any of the gears can drop off. When attaching the
sensor mounting plate, be sure that the pickup unit
will not face downward.
1) Remove the E-ring and the gear [1].
F-10-80