Chapter 3
3.2 Basic Sequence
3.2.1 Basic Sequence When the Power Is ON
Interval Name
SREDY(Scanner Ready)
SSTBY(Scanner Standby)
WMUP(Warm-up)
WMUPR(Warm-up Rotation) An interval in which the drive system starts, and the bias adjustment is executed.
PSTBY(Printer Standby)
3-2
T-3-2
Definition of Interval
An interval in which the shading correction is executed after the Start key is pressed.
An interval between the completion of the shading correction and switching the Start key
ON / turning the main power OFF.
An interval in which the drive system stops, and it ends when the completion
requirements of the fixing assembly startup is fulfilled.
An interval in which the copy/print request signal can be accepted.