Parts Replacement Procedure - Canon imagerunner C5180 Service Manual

5.7

Parts Replacement Procedure

5.7.1 Main Controller Box
5.7.1.1 Preparation for Removing the Main
Controller Box
1) Remove the rear upper cover.(page 12-
22)Reference[Removing the Rear Upper Cover]
2) Remove the rear left cover (upper).(page 12-
23)Reference[Removing the Rear Left Cover
(Upper)]
3) Remove the left rear cover (upper).(page 12-
21)Reference[Removing the Left Rear Cover
(Upper)]
5.7.1.2 Removing the Main Controller Box
1) Remove the main controller box cover [3].
- 1 harness (free from wire saddle [1])
- 15 screws [2]
[2]
2]
F-5-19
2) Remove the main controller box [3].
- 13 connectors (on PCB)
- 6 clamps [1]
- 6 screws [2]
[1] [2]
[2]
[2] [3]
[2]
2]
[2]
F-5-20
5.7.2 Main Controller PCB (main)
5.7.2.1 Preparation for Removing the Main
Controller PCB (main)
1) Remove the rear upper cover.(page 12-
22)Reference[Removing the Rear Upper Cover]
2) Remove the rear left cover (upper).(page 12-
23)Reference[Removing the Rear Left Cover
(Upper)]
3) Remove the left rear cover (upper).(page 12-
21)Reference[Removing the Left Rear Cover
(Upper)]
4) Remove the main controller box.
Chapter 5
[1] [2] [1]
[1] [2]
5-23
[1]
[3]