Canon imagerunner C5180 Service Manual page 80

Chapter 2
- Working time of this mode is six to eighteen
minutes, varying due to its circumstances ("OK"
is displayed if normally completed).
Service mode;
COPIER > FUNCTION > INSTALL > DRY-RT
5) Take out the included transfer cleaning unit from
its packaging bag, and remove the packing
material (cardboard).
Do not touch the tip of the transfer cleaning unit
blade. The area is coated with lubricant.
6) Fit the included transfer cleaning unit [1] using the
screw [2] removed in step 4).
(Match the boss [4] found at the top of the waste
toner feedscrew case against the groove [3] in the
transfer cleaning unit base.)
[1]
[2]
F-2-30
Be sure that the front cover rib [2] is not in contact
with the edge [1] of the transfer cleaning unit blade.
2-14
[4]
[3]
[1]
[2]
F-2-31
7) While holding the waste toner box down, shift the
intermediate transfer unit release lever back to its
initial position.
F-2-32
[2]
[1]