2) Attach the bushing [1] to the frame; then, attach
the gear shaft [2].
F-10-81
3) Fit the 6 locations [A] indicated in the figure
firmly into the holes of the mounting plate; then,
secure the sensor mounting plate [2] in place.
F-10-82
4) Attach the gear [1] and the E-ring [2].
F-10-83
5) Turn the gears to see that the movement is smooth.
10.10.12 Cassette Paper Level
Sensor (A/B)
10.10.12.1 Preparation for Removing the
Cassette Paper Level Sensor (A/B)
1) Remove the cassette.
MEMO:
The cassette 1/2 and the pick-up unit 1/2 may also be
removed in the same way.
1-1) Slide out the cassette.
2) Remove the front right cover. (page 12-
22)Reference[Removing the Right Front Cover]
3) Remove the rear right cover. (page 12-
22)Reference[Removing of the Right Rear
Cover]
Chapter 10
10-47