Safety - Canon imagerunner C5180 Service Manual

4) Turn off the main power switch.
5) Shift the breaker switch [1] back to the ON side.
Check to be sure that the breaker switch is on the ON side. If it has stopped between the ON and OFF sides,
push it back to the OFF side and then to the ON side.
6) Turn on the main power switch.

1.2.5 Safety

1.2.5.1 CDRH Regulations
The Center for Devices and Radiological Health of the US Food and Drum Administration put into force
regulations concerning laser products on August 2, 1976. These regulations apply to laser products
manufactured on and after August 1, 1976, and the sale of laser products not certified under the regulations is
banned within the Untied States. The label shown here indicates compliance with the CDRH regulations, and
its attachment is required on all laser products that are soled in the United States.
[1]
(ON)
(OFF)
F-1-18
F-1-19
Chapter 1
1-27