Canon imagerunner C5180 Service Manual page 777

Chapter 19
6. DRBL-2
Sub item
DF-PU-RL Number of sheets that have passed through ADF paper feed roller.
(count retained by controller PCB)
DF-SP-PL ADF separation roller no. of sheets fed
DF-SP-PD Number of sheets that have passed through ADF separation pad.
(count retained by controller PCB)
DF-FD-RL DF Separation plate separation sheet count
Single side: Scanned document each sheet +1
Duplex: Scanned document each sheet + 3 (front, back, idle feed)
No distinction between large and small.
DF-SP-RL Number of sheets that have passed through ADF separation roller.
(count retained by controller PCB)
LNT-TAP1 for the dust collecting tape A, indicates the number of sheets that have passed.
(count retained by controller PCB)
LNT-TAP2 for the dust collecting tape B, indicates the number of sheets that have passed.
(count retained by controller PCB)
LNT-TAP3 for the dust-collecting tape C, indicates the number of sheets that have passed.
(count retained by controller PCB)
LNT-TAP4 for the dust-collecting tape D, indicates the number of sheets that have passed.
(count retained by controller PCB)
LNT-TAP5 for the dust-collecting tape D, indicates the number of sheets that have passed.
(count retained by controller PCB)
STAMP Stamp operation count
PF-PU-RL for the paper deck pickup roller, indicates the number of sheets that have passed.
(count retained by controller PCB)
PD-SP-RL for the paper deck separation roller, indicates the number of sets that have passed.
(count retained by controller PCB)
PD-FD-RL for the paper deck feed roller, indicates the number of sheets that have passed.
(count retained by controller PCB)
C3-SP-RL Count 3 separation roller no. of sheets fed
C3-FD-RL Count 3 separation roller no. of sheets fed
C4-SP-RL Count 4 separation roller no. of sheets fed
C4-FD-RL Count 4 separation roller no. of sheets fed
FIN-STPR Number of staple operations.
SDL-STPL Number of saddle staple operations.
Incremented by 1 even for L-size sheets.
FN-BFFRL for the buffer roller, indicates the number of times it has gone on.
(count retained by DC controller PCB)
DL-STC-L Paper eject static eliminator brush (L) sheet count
DL-STC-R Paper eject static eliminator brush (R) sheet count
ENT-STC Entrance static eliminator brush sheet count
CENT-STC Swing guide static eliminator brush (R) sheet count
BACK-ROL Reverse roller static eliminator brush (R) sheet count
FIN-STP2 Finisher-SA1 stapler operation count
19-132
T-19-76
COPIER>COUNTER>DRBL-2
Description level.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1