20.6.5 Download of System Software (Overwriting)
[3]: Upgrade (Overwrite all)
Regardless of the system software version in HDD, download the system software in the USB memory.
Unlike in case of Menu [1], the automatic reboot after the download is not executed. By turning OFF/ON the
power supply manually, writing of the system software is executed on start-up.
<Procedure>
1) If the power of the machine is ON, turning off the main power after executing HDD shutdown processing.
2) Connect the USB memory to the USB port.
3) Get the machine into the download mode (the normal mode, or the safe mode).
4) By following the display on the control panel, press key.
[3] -> [0]: Execution of download / Keys other than [0]: Return to the menu screen
5) The download status is displayed on the control panel during download. When download is completed, the
message prompting to press key is displayed, so press any key. In case of the normal mode, the shutdown
sequence is activated.
F-20-57
F-20-58
Chapter 20
20-39