F-9-92
Points to Note When Attaching the Primary
Transfer Roller
1) Bend over the edge of the sheet [1] at the front,
and fit the edge [2] of the roller and then fit its rear
side.
[1]
F-9-93
[2]
2) Check that the edge of the sheet [1] is on the inner
side of the rib [2].
F-9-94
9.9.11 Secondary Transfer External
Roller
9.9.11.1 Preparation for Removing the
Secondary Transfer External Roller
1) Remove the fixing unit.
1-1) Remove the fixing drive unit.(page 11-
32)Reference[Removing the Fixing Drive
Unit]
1-2) Remove the fixing unit.
2) Remove the fixing/feeder unit.(page 10-
63)Reference[Removing the Fixing/Feeder Unit]
Chapter 9
9-67