Canon imagerunner C5180 Service Manual page 710

Sub item
MTR Used to specify motor for operation check.
(Range: 1 to 25; 18 and above are reserved.)
Operation method
1) Select this item.
2) Enter the desired motor code on the numeric keypad.
1: Drum ITB motor M1
2: Toner container motor (Y) M20
3: Toner container motor (M) M21
4: Toner container motor (C) M22
5: Toner container motor (Bk) M23
6: Cassette 1 paper feed motor M6
7: Cassette 2 paper feed motor M7
8: Cassette 3 paper feed motor M51
9: Cassette 4 paper feed motor M52
10: Paper deck main motor M1D (paper deck)
11: Registration front motor M8
12: Registration motor M9
13: Paper delivery vertical path motor M10
14: Face-down paper delivery motor M11
15: Fixing motor M24
16: Horizontal registration motor M25
17: Two-sided transfer motor M26
3) Press the OK key.
4) Press MTR-ON, and check the operation.
MTR-ON Starts motor operation.
Operation method
Toner container motors (Y/M/C/K):
1) Remove the toner container, and leave the front cover open and push the front cover detect sensor
with cover switch tool.
2) Select this item, and press the OK key.
- 10 seconds ON -> OFF
Horizontal resist motor:
1) Select this item, and press the OK key.
- HP search operation starts -> Stops automatically when complete
Motors other than toner container motors (Y/M/C/K) or horizontal resist motor:
1) Select this item, and press the OK key.
- 10 seconds ON -> OFF
SL Used to specify solenoid for operation check.
(Range: 1 to 15; 10 and above are reserved.)
Operation method
1) Select this item.
2) Enter the desired solenoid code on the numeric keypad.
1: Manual paper feed solenoid SL1
2: Paper delivery path switching solenoid 1 SL2
3: Cassette 1 paper feed solenoid SL3
4: Cassette 2 paper feed solenoid SL4
5: Cassette 3 paper feed solenoid SL51
6: Cassette 4 paper feed solenoid SL52
7: Paper delivery path switching solenoid 2 SL5
8: Paper deck paper feed solenoid SL1D
9: Paper container OPEN solenoid SL2D
3) Press the OK key.
4) Press SL-ON, and check the operation.
SL-ON Starts solenoid operation.
Operation method
1) Select this item, and press the OK key. The solenoid turns ON/OFF in the pattern below.
0.5 second ON -> 10 seconds OFF -> 0.5 second ON -> 10 seconds OFF -> 0.5 second ON -> OFF
COPIER>FUNCTION>PART-CHK
Description
Chapter 19
level.
1
1
1
1
19-65