Canon imagerunner C5180 Service Manual page 376

10.10.12.3 Points to Note When Mounting
the Pickup System Sensor Mounting
Plate
Points to Note When Mounting the Sensor
Mounting Plate
Any of the gears can drop off. When attaching the
sensor mounting plate, be sure that the pickup unit
will not face downward.
1) Remove the E-ring and the gear [1].
F-10-88
2) Attach the bushing [1] to the frame; then, attach
the gear shaft [2].
F-10-89
3) Fit the 6 locations [A] indicated in the figure
firmly into the holes of the mounting plate; then,
secure the sensor mounting plate [2] in place.
F-10-90
4) Attach the gear [1] and the E-ring [2].
F-10-91
5) Turn the gears to see that the movement is smooth.
Chapter 10
10-49