Pickup Vertical Path Cover Open/Closed Sensor - Canon imagerunner C5180 Service Manual

Chapter 10
10.10.32 Pickup Vertical Path Cover
Open/Closed Sensor
10.10.32.1 Preparation for Removing the
Pickup Vertical Path Cover Open/
Closed Sensor
1) Remove the cassette.
MEMO:
The cassette 1/2 and the pick-up unit 1/2 may also be
removed in the same way.
1-1) Slide out the cassette.
2) Remove the front right cover. (page 12-
22)Reference[Removing the Right Front Cover]
3) Remove the rear right cover. (page 12-
22)Reference[Removing of the Right Rear
Cover]
4) Remove the pickup vertical path cover [3].
- 1 screw [2] (remove the pickup vertical path
lower cover [1])
F-10-164
5) Remove the pickup unit [3]. (page 10-
36)Reference[Removing the Pickup Unit]
10-70
10.10.32.2 Removing the Pickup Vertical
Path Cover Open/Closed Sensor
1) Remove the sensor mounting plate [3].
- connector [1]
- screw [2]
F-10-165
2) Remove the sensor flag [2].
- spring [1]
F-10-166