Manual Feed Unit Open/Closed Sensor - Canon imagerunner C5180 Service Manual

Chapter 12
2) Remove the right upper cover [2].
- 4 screws [1]
F-12-81
3) Remove the pattern reader unit.(page 9-
79)Reference[Removing the Pattern Reader Unit]
12.5.22.2 Removing the Environment
Sensor
1) Insert a screwdriver from the hole on the right
upper stay of the main body, and remove the 1
screw [1] to dismount the environment sensor
mount [2].
F-12-82
12-42
2) Free the claw [2] at the sensor mount to detach the
environment sensor [2].
- 1 connector [1]
F-12-83
12.5.23 Manual Feed Unit Open/
Closed Sensor
12.5.23.1 Preparation for Removing the
Manual Feed Unit Open/Closed
Sensor
1) Remove the rear fan cover.(page
22)Reference[Removing the Rear Fan Cover]
2) Remove the rear upper cover.(page 12-
22)Reference[Removing the Rear Upper Cover]
3) Remove the DC controller PCB cover.
4) Remove the DC controller box2.(page 12-
31)Reference[Removing the DC Controller
Box2]
5) Remove the DC controller box1.(page 12-
32)Reference[Removing the DC Controller
Box1]
6) Remove the manual feeder unit open/close sensor
mount [3].
- 4 connectors [1]
- 1 screw [2]
12-