Parts Replacement Procedure; Front Cover; Before Removing The Front Cover Unit; Removing The Front Cover Unit - Canon iR C1020 Series Service Manual

11.5 Parts Replacement Procedure

11.5.1 Front Cover

11.5.1.1 Before Removing the Front Cover Unit

1) Remove the ETB unit.(page 8-30)Reference [Removing the ETB Unit]
2) Remove the rear cover unit.(page 11-11)Reference [Removing the Rear
Cover Unit]
3) Remove the left cover.(page 11-13)Reference [Removing the Left Cov-
er]
4) Remove the right cover.(page 11-11)Reference [Removing the Right
Cover]

11.5.1.2 Removing the Front Cover Unit

1) Turn the 2 drawer connectors [1] up.
[1]
2) Remove the cable cover [1].
- 1 screw [2]
- 1 claw [3]
[3]
3) Remove the relay connector [1] and the harness [2] from the harness guide
[3].
[1]
F-11-5
[2]
[1]
F-11-6
0018-9092
0018-9093
4) While lifting the front cover unit [1], remove the 2 links [2] from the 2
shafts [3] and raise it in the direction of the arrow.
[1]
5) Turn the 2 hinges [1] up in the direction of the arrow.
- 4 screws (binding) [2]
[2] [3] [1]
F-11-7
[3] [2] [3] [2]
F-11-8
Chapter 11
11-9