Duplex Roller 4 - Canon imagerunner C5180 Service Manual

Chapter 10
[A]
F-10-201
Be sure to mount it so that the front side of the roller
shaft is in contact with the leaf spring [1].
F-10-202
10-80

10.10.39 Duplex Roller 4

10.10.39.1 Preparation for Removing the
Duplex Roller 4
1) Remove the fixing unit.
1-1) Remove the fixing drive unit.(page 11-
38)Reference[Removing the Fixing Drive
Unit]
1-2) Remove the fixing unit.
2) Remove the fixing/feeder unit.(page 10-
63)Reference[Removing the Fixing/Feeder Unit]
3) Lift the duplexing open/close guide [3] in the
direction of [A] and shift it in the direction of [B].
Then, remove it.
- 1 connector [2] (Open sheet [1].)
[A]
[B]
[1]
[2]
F-10-203
[3]