Canon imagerunner C5180 Service Manual page 414

[2]
[4]
[1]
F-10-222
18) Remove the high-voltage unit 2. (page 12-
30)Reference[Removing the High-Voltage Unit
2]
19) Remove the drum ITB motor mount.
- 2 Connectors [1]
- 3 Screws [2]
[2]
[1]
[2]
[1]
F-10-223
[3]
[3]
[3]
[3]
[3]
[2]
Points to note when removing the drum
ITB motor mount
When removing it, insert a hand from the inside of
the pulled out manual feed unit. Then remove it from
the rear side plate while pressing the swing plate [1]
located in the read side of the drum drive unit.
The drum drive unit is hung from a boss attached to
the rear side plate, so lift up the unit when removing
it.
20) Remove the manual feed cooling fan duct [4]
including the fan.
- 2 Wire saddle [1]
- 1 Connectors [2]
[3]
- 3 Screws [3]
[2]
[2]
[3]
Chapter 10
F-10-224
[1] [4]
F-10-225
[3]
10-87