Chapter 20
20.2.4 Connection (At Using USB Memory)
[Required items]
USB memory with the system software for this machine installed.
[Procedure]
1) After checking if execution/memory lamp on the control panel turns off, turn OFF the main power switch as
in the following procedure.
1-1) Push the control panel power switch for three seconds or more.
1-2) Implement the shutdown sequence.
1-3) Turn OFF the main power switch.
2) Connect the USB memory [2] to the USB port [1].
3) If this machine is connected with the network cable, detach it.
4) Make the machine be on the download mode for the function to be used.
In the case of the normal mode
Press 1+7 to turn OFF the main power switch.
After start up, select the service mode COPIER>FUNCTION>SYSTEM>DOWNLOAD and push [OK].
In the case of the safe mode
When pressing 2+8 to turn ON the main power switch, it starts to operate on the safe mode.
20-12
[1]
F-20-14
[2]