Canon imagerunner C5180 Service Manual page 733

Chapter 19
VP-ART This mode enables line art processing to be changed.
The line art outline processing in scalable PDF is changed.
Setting range
0 to 99
Increase value:: Outline is made smoother.
Decrease value:: Outline is made rougher.
[Factory settings and after RAM clear: 1]
VP-TXT This mode enables text vectorisation processing to be changed.
The text vectorisation processing in scalable PDF is changed.
Setting range
0 to 99
Increase value:: Outline is made smoother.
Decrease value:: Outline is made rougher.
[Factory settings and after RAM clear: 1]
UI-PRINT Control panel print job screen display restriction
Switches between display and non display of control panel print job screen.
(Some users with customized control panels prefer not to display this screen.)
Setting values
0: No display
1: Display
[Factory settings and after RAM clear: 1]
Note:
Here, 'print job' refers to a new screen loaded from E307G. In order to enhance the convenience of
print related functions, screens that used to be treated as job status screens in the conventional system
status have been upgraded to tab screens.
WUEV-SW Sleep notification switch
Sets whether to notify the DS application on the network when the copier main unit enters or recovers
from sleep mode.
Setting values
0: Send sleep notification.
1: Do not send sleep notification.
[Factory settings and after RAM clear: 0]
WUEV-INT Sets sleep notification interval.
Sets interval at which sleep notification is sent.
Setting range
0-65535 (Sec.)
[Factory settings and after RAM clear: 600]
WUEV- Sets sleep notification port number.
POT
Sets the PC port number to which sleep notification is to be sent.
Setting range
1 to 65535 (Sec.)
[Factory settings and after RAM clear: 11427]
WUEV- Sets sleep notification range.
RTR
Sets the number of routers via which sleep notification may be sent.
Setting range
1 to 255
[Factory settings and after RAM clear: 3]
SJB-UNW Secure print job storage number (number of reserved jobs) switch
Toggles secure print job storage number (number of reserved jobs) upper limit between 50 and 90.
Setting range
0:50
1:90
[Factory settings and after RAM clear: 0]
19-88
COPIER>OPTION>BODY
2
2
2
2
2
2
2
2