Canon imagerunner C5180 Service Manual page 552

8) Remove the drum drive unit [3].
- 6 connectors [1]
- 7 screws [2]
[2] [1]
[1]
[2]
[2]
F-12-137
12.5.39.2 Removing the Drum Unit Drive
Belt
Never remove the screws [1] (identified by a red
marking) used to secure the belt tension plate in
place. (The plate is used to maintain a specific degree
of tension on the belt.)
[1]
F-12-138
[2]
[1]
[3] [2]
1) Remove the belt tension pulley cover [3] (2
positions on the right and left sides)
- 4 clamps [1]
- 4 screws [2]
[3]
[2]
[2]
[2]
2) Remove the drum unit drive belt [2].
- the belt retaining roll [1] found on the right side
Chapter 12
[2]
[2] [1]
[1]
F-12-139
[2] [1]
F-12-140
[3]
12-59