Canon imagerunner C5180 Service Manual page 202

6.4.12.2 Removing the Scanner Drive
Cable
1) Remove the 2 screws [1], and detach the reading
glass left retainer [2].
Take care so that the leaf spring will not come off
when removing the reading glass left retainer.
2) Remove the reading glass [3].
3) Remove the 2 screws [4], and detach the right
glass retainer [5].
[3]
[2]
[1]
[4]
F-6-73
When attaching it, be sure to hold down both ends of
the leaf spring [A] with your fingers. (Take care not
to bend the leaf spring.)
Be sure to attach it while forcing the left glass
retainer [B] against the reading glass [C].
Check to make sure that the side of the reading glass
and the leaf spring [D] of the left glass retainer are in
firm contact.
Otherwise, dust from the reading glass can start to
collect, causing lines in images.
[4] [5]
Chapter 6
[A]
F-6-74
6-35