Chapter 10
3-2) Remove the sheet [1] from behind the fixing
feeder assembly.
- 6 snap-ons [A]
- 3 hooks [B]
[A]
[1]
F-10-213
4) Remove the horizontal registration motor support
plate [3].
- connector [1]
- 2 screws [2]
[1]
F-10-214
10-84
[B]
[2]
[3]
- When attaching the horizontal registration motor
support plate [1], be sure to bring the horizontal
registration motor support plate firmly in contact
with the grounding lead spring [2] found under the
guide plate.
- After replacement, check that the sensor flag moves
smoothly.
[A]
[A]
[2]
[1]
F-10-215