Chapter 10
10.10.25.2 Removing the Horizontal
Registration Motor
1) Remove the horizontal registration motor [3].
- connector [1]
- 2 screws [2]
[2]
[3]
[2]
F-10-134
10.10.26 Registration Sensor
10.10.26.1 Preparation for Removing the
Registration Sensor
1) Remove the manual feed unit. (page 10-
52)Reference[Removing the Manual Feed Unit]
2) Remove the transparency sensor mounting Plate.
2-1) Remove the sensor base [3] found at the bottom.
- 3 connectors [1]
- 2 screws [2]
F-10-135
10-62
10.10.26.2 Removing the Registration
Sensor
1) While taking care not to touch the light-emitting
face of the transparency sensor [1], remove the
registration sensor [2].
[1]
10.10.27 Fixing/Feeder Unit
10.10.27.1 Preparation for Removing the
Fixing/Feeder Unit
1) Remove the fixing unit.
1-1) Remove the fixing drive unit.(page 11-
38)Reference[Removing the Fixing Drive
Unit]
1-2) Remove the fixing unit.
2) Remove the fixing/feeder unit.(page 10-
63)Reference[Removing the Fixing/Feeder Unit]
F-10-136