Control Panel Inverter Pcb - Canon imagerunner C5180 Service Manual

Chapter 12
5) Remove the control panel back plate [6].
- 3 connectors [1] from the CPU PCB (Free the
cable from the clamp.)
- 2 flat cables [2]
- 2 connectors [3] from the inverter PCB (Free the
cable from the clamp.)
- 1 binding screw [4]
- 8 self-tapping screws [5]
F-12-75
12.5.20.2 Removing the Control Panel Key
Switch PCB
1) Remove the control panel key switch PCB [2].
- 7 screws [1]
F-12-76
12-40

12.5.21 Control Panel Inverter PCB

12.5.21.1 Preparation for Removing the
Control Panel Inverter PCB
1) Remove the card reader cover.(page 12-
21)Reference[Removing the Card Reader Cover]
2) Remove the
20)Reference[Removing the Front Cover]
3) Remove the control panel [2] toward the front.
- 4 screws [1]
[1]
F-12-77
4) Remove the control panel [2].
(Referring to procedure 12.5.20.1)
5) Remove the control panel back plate [6].
(Referring to procedure 12.5.20.1)
front cover.(page
[2]
12-