Registration Motor - Canon imagerunner C5180 Service Manual

Points to Note When Attaching the Manual
Feed Pickup Solenoid
When attaching the solenoid [1], be sure to hook the
flapper [A] on the claw [B] of the gear [2].
[A]
[1] [B]
F-10-124

10.10.23 Registration Motor

10.10.23.1 Preparation for Removing the
1) Remove the manual feed unit. (page 10-
2) Remove the manual feed unit cover. (page 12-
3) Remove the motor cover.
3-1) Remove the motor cover [2] at the rear.
[2]
10.10.23.2 Removing the Registration
1) Remove the registration motor [3].
When mounting the registration motor, be sure that
the belt is fitted to the gear of the motor shaft.
Registration Motor
52)Reference[Removing the Manual Feed Unit]
28)Reference[Removing the Manual Feed Unit
Cover]
- screw [1]
[1]
F-10-125
Motor
- connector [1]
- 2 screws [2]
[1]
F-10-126
Chapter 10
[2]
[2]
[3] [2]
10-59