Table of Contents
Advertisement
1-3) Release the U-turn lever [1], and fix it with the
tape [2], etc.
Unless the pressure release lever is fixed, the release
lever will fall down, which may cause a flaw on ITB.
F-9-70
When removing the intermediate transfer unit, be
careful to keep the upper side from contact with the
main unit.
F-9-71
2) While picking the tabs at the front and the rear,
slide out the intermediate transfer unit [1]; then,
remove it by holding it by the indicated area [2].
F-9-72
F-9-73
Chapter 9
9-61
Advertisement
Chapters
Table of Contents
