Canon imagerunner C5180 Service Manual page 155

5) Remove the HDD [3].
- 1 clamp [1]
- 6 screws [2]
[2]
[2]
F-5-25
6) Remove the 2 HDD mounting plates [2].
- 2 screws each [1]
[1]
[1]
F-5-26
7) Remove the main controller PCB (sub RB-A) [4].
Skip this step if there is no main controller PCB (sub
RB-A).
- 2 screws [1]
- 1 mounting plate [2]
- 1 connector [3]
[1]
[3]
[2] [1]
[2] [1]
[4]
[1]
[2]
F-5-27
Points to Note When Mounting the Main
Controller PCB (sub RB-A)
Check to be sure that the PCB [3] is between the
mounting plate [1] and the leaf spring [2].
[1] [2]
F-5-28
8) Remove the image memory (SDRAM) [1].
Chapter 5
[3]
[3]
5-25