Canon imagerunner C5180 Service Manual page 658

b. Alarm Data Display
AA Alarm sequence number 1 to 50 (the larger the number, the older the error)
BBBB Date of alarm
CCCC Time of alarm
DDDD Time alarm was restored
EE Alarm location code (as will hereinafter be described in detail)
FFFF Alarm code (as will hereinafter be described in detail)
GGGG Alarm detail code (as will hereinafter be described in detail)
HHHHHH Total counter value when alarm is generated
c. Alarm Code Detail
Alarm location
EE
code
04 Paper feed/
conveying
09 Drum unit
10 Developer unit
11 Waste toner
conveying
33 Fan
34 Image position
compensation
control
61 Finisher staples
62 Saddle stitcher
T-19-17
FFFF Alarm code
0008: Side deck lifter alarm
0009: Horizontal registration detection alarm
0001: Drum life (Y)
0002: Drum life (M)
0003: Drum life (C)
0004: Drum life (K)
0001: Toner out (Bk)
0002: Toner out (C)
0003: Toner out (M)
0004: Toner out (Y)
0001: Waste toner box full (intermediate copy belt)
0007: Paper delivery cooling fan (FM5) alarm
0012: Manual feed cooling fan (FM6) alarm
0013: Copier exhaust heat fan (FM3) alarm
0001: Incorrect data read (zero included in image position pattern read data)
0002: Incorrect data read (abnormal data in at least 8 of the 10 sets of image position
patterns)
0003: Pattern read timeout alarm
0004: Attempt was made to compensate abnormally large slant as result of image position
compensation.
0005: Attempt was made to correct large abnormally large magnification as result of
image position compensation.
0001: No staples
0001: No stitch needle
Chapter 19
19-13