10.10.18.2 Removing the Manual Feed
Separation Roller
1) Remove the face plate [1].
Take care not to lose the spring found at the front
when removing the face plate.
F-10-109
When attaching the face plate, be sure that the spring
[2] fits into the hole [1] found on the front side of the
arm.
F-10-110
2) Remove the rear guide [1] and the middle guide
[2]. (Free the snap-in claw.)
F-10-111
3) Pick the tab [A] of the manual feed separation
roller [2], and pull it out in the direction of the
arrow.
F-10-112
Chapter 10
10-55