Canon imagerunner C5180 Service Manual page 106

Chapter 2
7) Remove the 2 screws [1] and detach the blanking
plate [2].
F-2-110
8) Insert the voice board [1] into the connector
(J1052) of the main controller PCB and secure it
with the 2 screws [2] that have been removed in
step 7).
When inserting the voice board into the connector,
be sure that the voice board is vertical against the
connector.
2-40
[2]
[1]
[1]
[1]
9) Go through the following steps to attach the
removed parts.
- Controller box cover
- Rear upper cover
10) Fix the reader communication cable with the
clamp.
[1]
J1052
F-2-111
[1]
F-2-112
J1052
[2]