Canon imagerunner C5180 Service Manual page 804

5-2) Click 'Start shutdown' button. The shutdown is performed.
5-3) Click 'OK', turn OFF/ON of the main power switch of the machine.
In the case of the safe mode
5-1) Turn OFF/ON the main power switch of the machine.
6) After restart, the downloaded system software is written on HDD or flash ROM, the status of the writing is
displayed on the screen of the control panel. The message urging the power OFF/ON is displayed when the
writing was completed, then turn OFF/ON the main power switch.
Prohibition of power OFF during downloading/writing
Do not turn OFF the power of the machine during downloading or writing. It may obstruct the activation of the
machine body. In such cases, download the system software after implementing HDD format.
F-20-34
F-20-35
Chapter 20
20-25