Removing The Control Panel Lcd; Cover Switch Assembly; Removing The Front Cover Switch Assembly; Manual Feed Tray Switch Assembly - Canon iR7086 Series Service Manual

Chapter 10
[2]
[2]
4) Remove the shielding plate assembly [1].
- 5 connectors [2]
- 2 screws [3]
- 8 screws [4]
[2]
[4]
[4]

10.5.14.2 Removing the Control Panel LCD

iR7105 / iR7095 / iR7086
1) Remove the control panel LCD [1].
- 2 screws [2]

10.5.15 Cover Switch Assembly

10.5.15.1 Removing the Front Cover Switch Assembly

iR7105 / iR7095 / iR7086
1) Remove the upper front cover unit.
2) Remove the 3 screws [1], and detach the cover switch assembly [2].
[1]
10-20
[2]
[1]
F-10-63
[4]
[3]
F-10-64
[1]
[2]
F-10-65
[1]
[2]
F-10-66
3) Disconnect the 3 connectors [1], and detach the cover switch assembly [2].

10.5.16 Manual Feed Tray Switch Assembly

10.5.16.1 Removing the Manual Feed Tray Switch
Assembly
[1]
iR7105 / iR7095 / iR7086
1) Remove the process unit cover. (4 screws)
2) Remove the 2 screws [1], and disconnect the 2 connectors [2]; then, de-
[2]
tach the pre-transfer charging assembly fan [3].
[4]
0011-8161
3) Disconnect the 3 connectors [1], and remove the screw [2]; then, detach
the potential sensor PCB [3].
0010-9616
4) Remove the screw [1], and disconnect the 2 connectors [2]; then, detach
the manual feed tray switch assembly [3].
[2]
F-10-67
[1]
[2]
F-10-68
[1]
[1]
F-10-69
[2]
F-10-70
[1]
0010-9615
[3]
[3]
[2]
[3]
[1]