Canon imagerunner C5180 Service Manual page 406

10.10.38.2 Removing the Duplex Roller 3
1) Remove the 2 E-rings [1].
F-10-197
2) Move the bearing [1] toward the inside of the
duplexing feeding guide.
F-10-198
3) Disconnect the connector of the duplexing pickup
clutch.
3-1) Bend the frame [2] in the direction of the arrow
slightly, and route the connectors [3] between
the frame and the guide.
- 3 screws [1]
3-2) Disconnect the connector [3].
[2]
[1]
F-10-199
4) Remove the duplexing roller 3 together with the
duplexing pickup clutch and the roller shaft.
5) Remove the duplexing roller 3 [5].
- 1 E-ring [1]
- 1 clutch [2]
- 2 bearings [3]
- 1 gear [4]
[4]
[3]
[5]
F-10-200
When mounting it, be sure to orient it so that the
clutch stop [A] is at the bottommost.
Chapter 10
[3]
[1]
[3]
[2]
[1]
10-79
[1]