Chapter 10
Points to Note When Attaching the Sensor
Flag
When attaching the sensor flag, be sure to match the
L-shaped area [A] of the spring against the groove
[B] in the face-down delivery sub frame.
F-10-286
2) Remove the face-down delivery sensor 1 [2].
- 1 connector [1]
F-10-287
10-104
10.10.54 Center Delivery Tray Full
sensor
10.10.54.1 Preparaion for Removing the
Center Delivery Tray Full sensor
1) Remove the upper left cover. (page 12-
23)Reference[Removing the Upper Left Cover]
2) Remove the center delivery tray [2].
- 2 screws [1]
F-10-288
3) Remove the delivery vertical path unit. (page 10-
93)Reference[Removing the Delivery Vertical
Path Unit]
10.10.54.2 Removing the Center Delivery
Tray Full sensor
1) Remove the center delivery tray full sensor [3].
- 1 sensor flag [1]
- 1 connector [2]
F-10-289