Download Of System Software (Auto, Or Selectable) - Canon imagerunner C5180 Service Manual

Writing Status to HDD:
6) Once the writing to HDD is completed, the message prompting to turn OFF/ON the power supply is
displayed. After turning OFF the main power switch and removing the USB memory, turn ON the main
power switch.

20.6.4 Download of System Software (Auto, or Selectable)

[2]: Upgrade (w Confirmation)
Compare the system software version in HDD with its in USB memory, and copy only the latest version from
the USB memory to the temporary storage area in HDD. In case of the same version or old version, the
confirmation message is displayed on the screen and the availability of download execution can be selected.
Unlike in case of Menu [1], the automatic reboot after the download is not executed. By turning OFF/ON the
power supply manually, writing of the system software is executed on start-up.
<Procedure>
1) If the power of the machine is ON, turning off the main power after executing HDD shutdown processing.
2) Connect the USB memory to the USB port.
3) Get the machine into the download mode (the normal mode, or the safe mode).
4) By following the display on the control panel, press key.
[2] -> [0]: Execution of download / Keys other than [0]: Return to the menu screen
F-20-51
F-20-52
F-20-53
Chapter 20
20-37