Environment Sensor - Canon imagerunner C5180 Service Manual

12.5.21.2 Removing the Control Panel
Inverter PCB
1) Remove the control panel inverter PCB [3].
- 3 connectors [1]
- 4 screws [2]
F-12-78

12.5.22 Environment Sensor

12.5.22.1 Preparation for Removing the
Environment Sensor
1) Pressure release of the intermediate transfer unit.
1-1) Open the front cover, and turn the intermediate
transfer unit pressure release lever to release it.
1-2) Slide the manual feeding unit out.
1-3) Remove the right middle cover [2].
- 1 screw [1]
F-12-79
1-4) Release the escape lever [1] and fix with the
tape [2] etc.
When the pressure release lever is not fixed, release
lever may drop and damage the ITB.
F-12-80
Chapter 12
12-41