Re-Pickup Roller - Canon imagerunner C5180 Service Manual

3) Remove the 2 gears [1] found at the front.
F-10-53
4) Remove the 2 E-rings [1], spring [2], and bearings
[3] [4] found at the front.
[4]
[3]
F-10-54
5) Remove the shaft [1], and detach the guide [2].
[1]
F-10-55
[1]
[1]
[1]
[2] [1]
[2]
6) Remove the registration lower roller [1].
[1]
F-10-56

10.10.5 Re-pickup Roller

10.10.5.1 Preparation for Removing the
Re-pickup Roller
1) Remove the manual feeder unit. (page 10-
52)Reference[Removing the Manual Feed Unit]
2) Remove the manual feeder unit cover. (page 12-
28)Reference[Removing the Manual Feed Unit
Cover]
3) Remove the motor cover.
3-1) Remove the motor cover [2] found at the rear.
-1 screw [1]
[1]
F-10-57
4) Remove the motor mounting plate.
-3 clamps [1]
-3 connectors [2]
-3 screws [3]
Chapter 10
[2]
10-39