The Waste Toner Assembly Cover Does Not Open When The Packing Tape Is Removed - Canon imageRUNNER ADVANCE C3330 Series Troubleshooting Manual
Hide thumbs
Also See for imageRUNNER ADVANCE C3330 Series:
- Service manual (1225 pages) ,
- Service information (6 pages) ,
- Replacement procedure (5 pages)
Table of Contents
Advertisement
Copier Color | iR-ADV C3330/C3325/C3320 Series |
The waste toner assembly cover does not open when the packing
tape is removed
[Symptom]
The waste toner assembly cover may not open when the packing tape is removed.
[Cause]
If the waste toner container is pulled to the left side with the packing tape, the gap [1] is narrowed between the waste toner
container and the rib that prevents attaching the waste toner container other way round.
When the gap is too narrow, the claw of the waste toner assembly cover [2] comes in contact with the waste toner container and
its rib, this makes difficult to open the cover and ends in the above mentioned symptom.
[Service work]
1) Remove the packing tape affixed at the left side of the main body on the waste toner container halfway [1] and open the waste
toner assembly cover [2].
2) Remove the packing tape all the way.
72
Advertisement
Table of Contents
