Chapter 2
2.2.7 Cassette Setup
1) Pull out the upper cassette, and remove the tape
and the lifting plate retainers [1]. (Do the same to
the lower cassette.)
F-2-50
2) Check the type of paper a user will use, and adjust
the slide guide [1] of each cassette to the paper
size.
[1]
F-2-51
2-20
[1]
STMT R
LTR
LTR R
LGL
11X17
3) Adjust the side guide plate [1] and the end plate
[2] to the scale of the paper size.
[2]
[1]
F-2-52
4) Attach the cassette size label [2] to the cassette
size plate [1].
F-2-53
5) Deposit paper in each cassette, and set it to the
main body.
[1]
[1]
[2]