Chapter 7
F-7-29
7.6.9 Registration Sensor
7.6.9.1 Removing the Registration Sensor
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Remove the two shafts [1], and then remove the transfer guide [2].
[2]
F-7-30
2) Release the two hooks [1], and then detach the registration sensor cover
[2].
7-10
[1]
[2]
[3]
[1]
[1]
3) Remove the two bosses [1], disconnect the connector [2], and then slide
the registration sensor unit [3] toward you to remove it.
0013-1236
4) Remove the registration sensor [1] by releasing the hook.
7.6.10 Registration Clutch
7.6.10.1 Removing the Registration Clutch
/ / / / iR1018 / iR1018J / / iR1022A / iR1022F / iR1022i / iR1022iF /
1) Detach the rear cover.
2) Remove the connector [1] and E-ring [2], and then remove the registration
clutch [3].
[2]
[1]
F-7-31
[2]
[3]
[1]
F-7-32
[1]
F-7-33
0013-1237