Registration Sensor; Before Removing The Horizontal Registration Sensor; Removing The Horizontal Registration Sensor - Canon imageRUNNER 5065 series Service Manual

[3]
7) Slide the horizontal registration unit [2].
- 2 screws [1]
[1]
8) Remove the horizontal registration motor [2].
- 2 screws [1]
[1] [2]

8.10.22 Registration Sensor

8.10.22.1 Before Removing the Horizontal Registration
Sensor
iR5065 / iR 5055 / iR5075 / / /
1) Detach the duplexing
12)Reference[Removing the Duplexing Feed Front Cover]
2) Remove the duplex feeding unit.(page 8-44)Reference[Removing the
Duplex Feeding Unit]

8.10.22.2 Removing the Horizontal Registration Sensor

iR5065 / iR 5055 / iR5075 / / /
1) Remove the fan together with the mount[3].
- 2 screws [1]
- 1 connector [2]
[2] [3] [1]
F-8-110
[2]
[1]
F-8-111
[1]
F-8-112
feed front cover.(page
2) Free the harness from the 3 wire saddles [1].
3) Remove the 2 screws [1].
0015-9417
10-
4) Turn the duplex feeding unit over.
0015-9415
5) Slide the unit.
- 4 screws [1]
6) Disconnect the connector of the duplex feeding unit in the rear side [1],
and free the harness [2] from the 2 edge saddles [3].
[1]
[4]
[2]
[3]
F-8-113
[1]
F-8-114
[1]
F-8-115
[1] [1]
F-8-116
Chapter 8
8-37