Wago Din Rails; Spacing; Figure 30: Spacing; Table 31: Wago Din Rails - WAGO -I/O-SYSTEM 750 Manual

WAGO-I/O-SYSTEM 750
750-882 Media Redundancy ETHERNET Controller
5.3.2

WAGO DIN Rails

WAGO carrier rails meet the electrical and mechanical requirements shown in the
table below.

Table 31: WAGO DIN Rails

Item No.
210-112
210-113
210-197
210-114
210-118
210-198
210-196
5.4

Spacing

The spacing between adjacent components, cable conduits, casing and frame
sides must be maintained for the complete fieldbus node.

Figure 30: Spacing

The spacing creates room for heat transfer, installation or wiring. The spacing to
cable conduits also prevents conducted electromagnetic interferences from
influencing the operation.
Description
35 × 7.5; 1 mm; steel; bluish, tinned, chromed; slotted
35 × 7.5; 1 mm; steel; bluish, tinned, chromed; unslotted
35 × 15; 1.5 mm; steel; bluish, tinned, chromed; slotted
35 × 15; 1.5 mm; steel; bluish, tinned, chromed; unslotted
35 × 15; 2.3 mm; steel; bluish, tinned, chromed; unslotted
35 × 15; 2.3 mm; copper; unslotted
35 × 8.2; 1.6 mm; aluminum; unslotted
Mounting 69
Manual
1.5.0