18.2.5.10 Rtc Module; 18.2.5.11 Dali/Dsi Master Module; Table 117: Rtc Module 750-640; Table 118: Dali/Dsi Master Module 750-641 - WAGO -I/O-IPC-C6 Manual

WAGO-I/O-SYSTEM 750
758-874/000-131 WAGO-I/O-IPC-C6
Output Process Image
Offset
0
1
2
3
4
5
*) Cyclic process image (Mailbox disabled)
**) Mailbox process image (Mailbox activated)

18.2.5.10 RTC Module

750-640
The RTC Module has a total of 6 bytes of user data in both the Input and Output
Process Image (4 bytes of module data and 1 byte of control/status and 1 byte ID
for command). The following table illustrates the Input and Output Process
Image, which have 3 words mapped into each image. Word alignment is applied.

Table 117: RTC Module 750-640

Input and Output Process Image
Offset
0
1
2

18.2.5.11 DALI/DSI Master Module

750-641
The DALI/DSI Master module has a total of 6 bytes of user data in both the Input
and Output Process Image (5 bytes of module data and 1 byte of control/status).
The following tables illustrate the Input and Output Process Image, which have 3
words mapped into each image. Word alignment is applied.

Table 118: DALI/DSI Master module 750-641

Input Process Image
Offset
0
1
2
Manual
Version 1.0.0
Byte Destination
High Byte
reserved
D1
D3
D5
C3
C1
Byte Destination
High Byte
ID
D1
D3
Byte Destination
High Byte
D0
D2
D4
Low Byte
C0 reserved
D0
Process data*) / Mailbox**)
D2
D4
D6 Control byte C3
C2 Control byte C1 Control byte C2
Low Byte
C/S Command byte
D0
D2
Low Byte
S DALI Response
D1 Message 3
D3 Message 1
I/O Modules 245
Description
Control byte C0
Process data*) /
reserved**)
Description
Control/status
byte
Data bytes
Description
Status byte
DALI Address
Message 2