112
CoDeSys 2.3 Runtime Environment
3.
To assign a new name to the task (e.g. PLC_Prog), click on "NewTask".
Then select the type of task. In this example, this is the "cyclic" type.
Figure 48: Changing the task name
4.
Add the previously created program function block PLC_PRG (see section
"Editing a Program Function Block") by right clicking on the "hour" symbol
and selecting "Append Program Call" in the context menu. Then click on
[...] button and [OK].
Figure 49: Call to add program function block
5.
Compile the example program by selecting Project > Rebuild all in the
context menu.
WAGO-I/O-SYSTEM 750
758-874/000-110 WAGO-I/O-IPC-C6
Manual
Version 2.3.0