Write Application; Figure 33: Modules Tab, Plc_Prg (Prg) Module; Figure 34: Plc_Prg Program Module Window, Module Context Menu Item - WAGO 750-880 Quickstart Reference

WAGO-I/O-SYSTEM 750
750-880, -881, -882 ETHERNET Programmable Fieldbus
3.3.5

Write Application

In the sample project, the application consists of a simple control of the first
channel (DO1) of the digital output module. It is controlled depending on the
states of both channels (DI1 and DI2) of the digital input module. A function
block with RS logic (reset dominant) is used.
1. Select the Modules tab.
2. Double-click on the PLC_PRG module to open the program block window.

Figure 33: Modules tab, PLC_PRG (PRG) module

3. In the program module window, click on the small square behind the three
question marks ??? to highlight it.
4. Then right-click to display the context menu.
5. Select the Box menu item.
An AND module is created by default.

Figure 34: PLC_PRG program module window, Module context menu item

Quickstart Reference
Version 1.0.0
Quickstart Description 41